Blown Film Extrusion Introduction

Blown Film Extrusion Introduction
Blown film extrusion is a technology that is the most common method to make plastic films, especially for the packaging industry. The process involves extruding a tube of molten polymer through a die and inflating to several times its initial diameter to form a thin film bubble. This bubble is then collapsed and used as a lay-flat film or can be made into bags. Usually polyethylene is used with this process, and other materials can be used as blends with these polymers. A diagram of a polyethylene chain is shown in Figure 1 to the right.
Background Theory on Polymers

In the cooling step of blown film extrusion, the amorphous, transparent melt crystallizes to form a translucent, hazy, or opaque film. The point where opacity begins in the bubble is known as the frost line. 
Fig 1: Model of polytheylene chain frompolyethylene Wikipedia article.The frost line height is controlled by several parameters: the air flow, film speed, and temperature difference between the film and the surroundings. Properties of the film, such as tensile strength, flexural strength, toughness, and optical properties, drastically change depending on the orientation of the molecules. As the transverse or hoop direction properties increase, the machine or longitudinal direction properties decrease. For instance, if all the molecules were aligned in the machine direction, it would be easy to tear the film in that direction, and very difficult in the transverse direction.

The Film Blowing machine Process

Fig 2: Schematic of set-up from User:J.Chiang.

Typically, blown film extrusion is carried out vertically upwards, however horizontal and downward extrusion processes are now becoming more common. Figure 2 shows a schematic of the set-up for blown film extrusion. This procedure consists of four main steps: The polymer material starts in a pellet form, which are successively compacted and melted to form a continuous, viscous liquid. This molten plastic is then forced, or extruded, through an annular die. Air is injected through a hole in the center of the die, and the pressure causes the extruded melt to expand into a bubble. The air entering the bubble replaces air leaving it, so that even and constant pressure is maintained to ensure uniform thickness of the film. The bubble is pulled continually upwards from the die and a cooling ring blows air onto the film. The film can also be cooled from the inside using internal bubble cooling. This reduces the temperature inside the bubble, while maintaining the bubble diameter. After solidification at the frost line, the film moves into a set of nip rollers which collapse the bubble and flatten it into two flat film layers. The puller rolls pull the film onto windup rollers. The film passes through idler rolls during this process to ensure that there is uniform tension in the film. Between the nip rollers and the windup rollers, the film may pass through a treatment centre, depending on the application. During this stage, the film may be slit to form one or two films, or surface treated. Advantages Blown film generally has a better balance of mechanical properties than cast or extruded films because it is drawn in both the transverse and machine directions. Mechanical properties of the thin film include tensile and flexural strength, and toughness. The nearly uniform properties in both directions allow for maximum toughness in the film.
Blown film extrusion can be used to make one large film, two smaller ones, or tubes that can be made into bags. Also, one die can make many different widths and sizes without significant trimming. This high level of flexibility in the process leads to less scrap material and higher productivity. Blown films also require lower melting temperatures than cast extrusion. Measured at the die opening, the temperature of cast film is about 220 C, where as the temperature of blown film is about 135 C. Furthermore, the cost of the equipment is approximately 50% of a cast line.

Blown Film Extrusion Disadvantages Blown film has a less effective cooling process than flat film. Flat film cooling is done by means of chill rolls or water, which have significantly higher specific heat capacities than the air that is used in the blown film cooling process. The higher specific heat capacity allows the substance to absorb more heat with less change in the substance temperature. Compared to cast film, blown film has a more complicated and less accurate method to control film thickness; cast film has a thickness variation of 1 to 2% versus the 3 to 4% for blown film. The resins used for casting typically have a lower melt flow index, which is the amount of polymer that can be forced through a standard die in 10 minutes according to a standard procedure. The melt flow index for cast film is about 5.0 g/10 min where as for blown film it is about 1.0 g/10 min. Consequently, the production rates for cast film are higher: cast film lines can reach production rates of up to 300m/min where as blown film lines are usually less than half this value. And finally, cast film has better optical properties, including transparency, haze, and gloss.

Common Problems Air entrapment between film layers and rollers – this may cause film scratching or wrinkling, or processing problems when winding up the film due to reduced friction. Possible solutions to this is using a vacuum to remove entrapped air or by using winding rolls with a diamond shaped groove in the rubber cover to increase surface area and decrease amount of entrapped air in the film. Large output fluctuations from the die – this causes thickness variations, and can be prevented by keeping the extruder clean and by using more consistently shaped pellets in the extruder. Melt fractures – these appear as roughness or wavy lines on the film surface, and can be eliminated by lowering the viscosity of the polymer melt. This can be done by increasing the melting temperature or by adding an internal lubricant to the material composition. Thickness variations in the film – this can be avoided by centering the die in the extrusion line before every run, adjusting the air speed of the cooling system, or by using heated die lips. Die lines on the surface of the film – this defect reduces the aesthetic appeal of the film, reduces optical properties, and weakens mechanical properties such as tear strength. This can usually be avoided by routinely cleaning the inner surfaces of the die and by refinishing scratched or roughened flow surfaces. Gels – these defects are small, hard globules encapsulated in the film or stuck on the film surface and reduce the aesthetic appeal of the film and cause stress concentration points which may result in premature failure. These are caused by overheating to the point of polymer degradation in the die, and can therefore be avoided by cleaning the inner surfaces of the die on a regular basis. Optimization of the Process Coextrusion One way to improve the line efficiency of blown film extrusion is to implement coextrusion. This is the process of extruding two or more materials simultaneously through a single die. The orifices in the die are arranged such that the layers merge together before cooling. This process saves time because it extrudes two or more layers at the same time, and it provides a method with fewer steps to produce multilayer films. The production rate for a coextruded multilayer film of three layers is about 65m/min, and the production rate for a single layer of blown film is about 130m/min. Thus, in order to produce 10 000m of a three layer multilayer film, it would take almost 4 hours using a single layer blown film process, and only 2 and a half hours using the coextrusion process. Furthermore, the film produced from the single layer process would require an extra step to glue the layers together using some sort of adhesive. Coextrusion is the least expensive means of producing layered films and the coextrusion system is capable of quick changeovers to minimize production line down time.

Minimizing the Melt Temperature
The efficiency of blown film extrusion can be improved by minimizing the temperature of the polymer melt. Reduction of the melt temperature causes the melt to require less heating in the extruder. Normal extrusion conditions have a melting temperature at about 190 C despite the fact that the temperature of the melt only needs to be about 135 C. However, it is not always practical to decrease the melting temperature by that much. By decreasing the melt temperature 2 to 20 C, the motor load can be decreased by about 1 to 10%. Furthermore, reduction of the melt temperature causes less need for cooling, so there is a reduced use of the cooling system. Moreover, removing heat from the bubble is usually the rate-limiting factor in this extrusion process, so by having less heat in the polymer to remove, the rate of the process can be increased, thus yielding higher productivity. A way to maintain the melt temperature at a minimum is to choose an extruder that is matched to the specific processing conditions, such as the material of the melt, pressure, and throughput.

Heated Extrusion Die Lips
Typically, solutions to melt fractures involve decreasing the output or increasing the melt temperature to decrease the shear stress in the extruder. Both of these methods are not ideal because they both reduce the efficiency of the blown film line. Heated extrusion die lips can solve this problem. This targeted heating method allows for film extruders to be run at higher production rates with narrower die gaps while eliminating melt fractures. Direct heat is applied to the surface of the polymer melt as it exits the die so that viscosity is reduced. Therefore, melt fractures, which are caused when trying to extrude too much of the polymer at one time, will no longer act as a limiting factor to increasing the production rate. Furthermore, heated die lips use less energy than increasing the melting temperature because only the surface of the melt is heated and not the bulk of the liquid. Another benefit of using heated die lips is that thickness variations can be controlled by adding heat to certain areas along the die circumference to make the film at that position thinner. This would ensure that no excess material is used.
Determine how much energy each of these processes can save per given volume of material. 

Above article from

Kingdom Machine Co.,ltd Ruian Economic Zone,Wenzhou,China 325200
Mobile:0086-13958812663;  0086-13088651008
Tel.:0086-577-65127709       Fax:0086-577-56846789 Whatsapp:0086-13958812663

Find Out Exactly How To Invest Your Cash With Less Associated Risk

Investments might be a difficult area for somebody to break into and also generate a little bit of money. Even though the person might want to begin investing for them to save for their future, if they aren’t mindful they could lose their particular savings and thus have to begin once again. Even though investing in stocks could be high risk, there are ways to lessen a person’s associated risk so that they have a far better potential for securing a little extra money to assist them to save for the long run.

Someone that is prepared to start investing in stocks might want to go to this page to be able to find out more regarding exactly how to start investing. It is a good suggestion for a person to learn exactly what a bunch of their choices are because stocks are not the only strategy to invest as well as might not be the ideal option for an individual. Rather, they might want to consider some other investment possibilities that do not have as high of a risk and will have a much better chance of helping the person build up extra funds when they are investing. They can additionally discover much more regarding which stocks are going to be lower risk to be able to assist them to locate the perfect stocks to invest in.

A person may furthermore need to read new details about exactly how working together with income mutual funds might be beneficial. In these instances, they aren’t performing the investments themselves, yet they’re letting a skilled professional deal with it for them. Someone with a significant amount of working experience will likely be in a position to assist them to lessen their associated risk as well as make an effort to generate a great deal of cash so they are able to have precisely what they will need to have for future years. They are going to wish to look for a qualified professional that can show they have received a very high return annually for their own clients.

Locating the ideal strategy to invest in order to reduce associated risk is not simple. Someone could, however, get info here which will help them to make the ideal investment decisions. If you might be interested in investing your money as well as you wish to start now, make sure you go here and check out all of the important information which is available to aid you.Start now to be able to get started investing in your potential future.

Do-it-yourself Or Work Together With A Business For A Security System?

Anytime somebody would like to be sure their own home is actually as protected as is feasible, they will generally have a pair of options. They’ll desire to think about whether they’ll wish to establish a Do it yourself home alarm system or maybe if they’ll want to work with one of the alarm companies Indianapolis to be able to be sure the system has just about everything they’ll need. Usually, it is a far better strategy for the person to work together with a company.

A firm will know each of the choices an individual has and how to install every little thing so it works together easily. They’re furthermore going to be able to get every little thing setup at once as well as make sure all of it works before they’ll leave. Creating a home alarm system might be unbelievably complex, therefore it is much better for a specialist to do this. Also, whenever an individual does their very own burglar alarm system, they’ll have to monitor it on their own. If they will work together with a security business, the company might offer the monitoring thus they will know a professional is always watching their particular home.

In the event you’re planning on acquiring a burglar alarm system, ensure you speak to one of the security system companies Indianapolis for assistance. They’re going to help you make sure the home security system has almost everything you’ll have to have as well as make certain everything is installed correctly for you.

Lanyards Make a Tie Between Utility and Adornment

It was once that the only individual who actually had a lanyard (and likelihood is, he did not realize that seemed to be precisely what the thing was known as) was the coach from your kids’ football lineup, whom donned one around his neck to hold his whistle handy. Skip forward several years, and they commence to appear at workshops, conventions, holidays and so on. Then corporations got in on the act and started wearing them for Identification badges. All seemed to be well for several more years after that and then suddenly, businesses, with their constant desire for some small dohicky they could possibly give away the recipient probably would not get rid of, found out the simple lanyard. They might be personalized! Abruptly, a contest seemed to be on … and in addition to refrigerator magnet business cards, ink pencils and also ball beanies, people throughout were wearing Lanyards detailed with the name, colors, logo design, website and contact information regarding local (and not so local) organizations.

It was actually as if the wave hovered for a minute there with conferences and business use, before booming into your public industry. After that the girls utilizing sparkles plus beads started into the actual arena, and suddenly nowadays there are no longer simply lanyards with ribbons, cords, ropes, straps and additionally webbing, but they’re handmade, made from metal, even going after themselves using LED lights! Lanyards help children never to wander off, searchers to maintain their own duck calls, tobacco users utilizing their e-cigs, photographers utilizing their lens caps and also loups. In the event the expanding number of people who are still continuing to discover brand-new ways to work with a lanyard is virtually any indication, their particular reputation likely has not even yet started to peak!

In case you are struggling for ways to use the many Lanyards in your selection, just seek advice from YouTube with regard to fresh new tips. Today, any lanyard, even though useful, will be as much one’s fashion accessory as it truly is everything else. The truth is, the most up-to-date versions in the marketplace, which come with individualized lockets and even customized clips and additionally latches really fill the space among adornment and additionally utility. Any business hunting for a great way to come to be remarkable in their consumers’ imagination wants just to style a lanyard which is exceptional enough to interest their particular vision along with their creativity and they’re going to have it manufactured due to the fact absolutely nobody throws away a stylish, valuable and also originally developed lanyard.

What Every Corporate Website Should Provide

A useful small business website design is important for the success of a typical business today that will would like to realize success. It isn’t really something that can be negotiated. There possibly was obviously a time of conversion a few years earlier when your organization could get away with a home made, newbie or even absolutely no web site, but no longer. Each and every business’s prospective clients tend to be on the market online, and whenever they look for the program or maybe merchandise you provide, they look for it on the web. They will use specific search phrases which will illustrate exactly what you choose to do, and in case your web page fails to pop-up in that initial page of outcomes, they likely definitely won’t be ringing a person’s telephone or maybe walking via your current entry way. It is merely that easy.

Consequently, precisely what tends to make to get a very good website? Specialist design! Fortunately, you’ll find many great internet marketing services and designers and also graphic designers around who are happy to help a person’s company give an established first effect. What’s needed is definitely an attractive appearance, using desirable type, a specific structure to follow, and also useful and engaging written content. You need to produce your clients precisely what they are seeking, and that is primarily info about how to find your products or services, if that’s exactly what they really want. A fantastic website informs, inspires, possibly enlightens and always issues forth a clear call to action.

The Software That Really Makes a Enterprise Owner’s Life a Bit Simpler

Absolutely everyone just about everywhere tend to be more distressed than ever before as daily life gets to be more hectic each day. Where once a guy might drive from one spot to another inside comparable peace, possibly hearing radio stations, or even the sound associated with utter quiet alone to help sooth one’s thought processes, today they are obliged to utilize that time catching up on calls because, after all, every single second matters. No individual, though, will be as likely now to truly feel just as overwhelmed with an elevated volume of things to attend to as will probably the common small company owner. This specific man or woman must still control all of the areas of his / her enterprise as he or she at any time did: supply, employees, customer support, upkeep, generation, orders, plus more.

Present day company administrator’s career has grown exponentially exactly where his particular consumer acquisition and also advertising and marketing are concerned. Today, he or she is in charge of the genuine establishment and additionally maintenance of an adequately SEO’d, attractive, rapidly to load plus receptive web site, for dealing with and also monitoring his particular company’s existence on-line, and thus for operating a continuing social websites plan. In the event that he’s intelligent, he’ll also allocate an important focus toward checking up on what all his key rivals are undertaking on the web, as well. Exactly the performance that this everyday operator has got to preserve online is frequently enough to keep this individual rather busy pretty much full time. In actual fact, it is actually ample to maintain an entire staff active all day long! It is a great thing, therefore, that such things as Chatmeter can be found.

What exactly is Chatmeter? It is basically a software program that does several of these on the web jobs regarding the business proprietor. Chatmeter simplifies the entire process of being liable for a new business’s social networking reputation on the web, and it likewise watches the Internet for any comment about the business, positive or negative, informing the owner, plus allowing it to be so he is able to respond promptly. That way, if adverse responses are usually put up, the guy can take action long before they go viral, and undertake a life regarding their own. Likewise, he is furthermore in a position to actually observe just what his particular key rivals are up to inside their on the web lifetime, therefore being aware of what it is actually that he may be simply being compared to by his particular potential customers, plus making him able to react quickly should he want. Chatmeter is often a tool that truly does make everyday living less difficult for many businesses.

Discover Exactly How One Firm Is Endeavoring To Improve Calgary And How You Can Help

The city of Calgary has a handful of properties that have not been filled or changed in a good amount of time, taking away from the overall quality of the area. One particular business, however, will be working away at ensuring the area will get the refreshed look it needs simply by buying into structures like these, carrying out a number of changes, and then leasing them to new companies to help boost the location.

A person who really wants to invest in the city could accomplish that by investing with a business which is working on improving the area. They might wish to take some time to be able to discover more with regards to the firm, how it invests the funds it gets, and also just how an individual could gain a great deal in time with their investments. By investing in a company similar to this, they are not simply investing in buildings. They’re actually investing in the city as a whole and also in the improvements that may be made to be able to make the location much better. It’s not only about boosting the look of the city, but about securing brand new companies and also making certain everyone who visits is likely to adore the town.

If perhaps someone wants to learn more concerning this business as well as all they may be accomplishing, they might wish to take the time to be able to learn much more regarding the Arlington Street Investments CEO. Finding the time to be able to learn far more concerning Frank Lonardelli provides them with the chance to learn a lot more regarding why he’s so committed to this specific area, precisely what enhancements he has already accomplished, and precisely what developments he desires to accomplish in the future. They’re able to get a far better thought of if they desire to invest with the firm to be able to work with them on the advancements for the city by understanding exactly what can be expected and what’s already been done.

In case you’re interested in investing not merely in real estate but in the complete town of Calgary, spend some time today to be able to understand a lot more about the business which is doing nearly as much as is possible to be able to help the city. Learn more about Frank Lonardelli and also everything he’s working on now by checking out now. Using the information on this page, you are able to discover a lot more concerning this particular business as well as exactly how they’re endeavoring to help.